Carbon Steel EN-1A Bars

vCarbon Steel EN-1A Bars are distinguished by their low carbon content and the addition of sulfur, which boosts their machinability. These bars are known for their excellent free-cutting properties, making them perfect for precision machining and mass production tasks. EN-1A steel typically offers moderate tensile strength and hardness, making it suitable for light-duty mechanical applications. While it’s not designed for high-stress or impact situations, its smooth surface finish and consistent machining behavior make it a trustworthy choice for detailed shaping and threading work. Overall, EN-1A strikes a great balance between ease of fabrication and adequate mechanical performance.

Carbon Steel EN-1A Rods Dealer in Melbourne, Carbon Steel 230M07 Bars Manufacturer in Melbourne, Carbon Steel EN-1A Square Bars Supplier in Sydney, Carbon Steel EN-1A Flat Bars Price List in Canberra, Carbon Steel EN-1A Rectangular Bars Supplier in Brisbane, DIN 1.0715 Carbon Steel EN-1A Bars Price List in Australia, Carbon Steel EN-1A Round Bars Weight Calculator Exporter Stockist in Adelaide.

Carbon Steel EN-1A Round Bars

Carbon Steel EN-1A Hex Bars

Carbon Steel EN-1A Series Rods

What is Carbon Steel EN-1A Series Bars ?

Carbon Steel EN-1A Bar is known in the market name free-cutting mild steel contains 0.10-0.13%C, small proportion of Mn i.e. from 0.30-0.60 %, phosphorus limited to 0.05 and sulfur is between the range of 0.12-0.20%. Designed for better machining properties, yield strength of it is 400-600MPa, yielding at 250 MPa elongation is ranged between 20-30 %. EN-1A is known for ease of machining. It is well suited for producing shafts, fasteners, and fittings. Good weldability but not used for high-strength applications as carbon content is relatively low.

Carbon Steel EN-1A Rods Exporter in Australia, Carbon Steel EN-1A Round Bars Stockist in Canberra, Carbon Steel EN-1A Hex Bars Supplier in Australia, Carbon Steel 230M07 Cold Drawn Round Bars Distributor in Australia, Carbon Steel EN-1A Rods Stockist Brisbane Carbon Steel EN-1A Rods Price in Brisbane, Carbon Steel EN-1A Round Bars Price List, Carbon Steel EN-1A Rectangular Bars Supplier in Australia, Carbon Steel EN-1A Bars DimEN-8sions in Australia.

Carbon Steel EN-1A Bars Specifications

Grade	EN1A Round Bar
EN1A Square bar size	4 to 100mm
Carbon Steel EN-1A Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
CS EN-1A Hex Bar size	2-100mm A/F
EN1A Angle bar size	3mm20mm20mm~12mm100mm100mm
Carbon Steel EN-1A Rectangles Size	33 x 30mm to 295 x 1066mm
CS EN-1A Flat bar size	Thickness: 2 -100mm
CS EN-1A Flat bar size	Width: 10 to 500mm
EN1A Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Carbon Steel EN-1A Section	3.0 to 12.0mm thickness
CS EN-1A Round bar size	Diameter: 3-~800mm
EN1A Billet Size	1/2″ to 495mm Diameter
Carbon Steel EN-1A Round Bar Standard Dimensions	Diameter / Height:
EN1A Surface	Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Carbon Steel EN-1A Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
CS EN-1A Technique	EN1A Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
EN1A Condition	Hardened & tempered, annealed
Finish	Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Form	EN1A Round, Rod, T-Bar, Nickel Alloy Channel Bar, Precision Ground Bar, Nickel Alloy Flat Bar, Nickel Alloy Square Bar, Nickel Alloy Blocks, Nickel Alloy Round Rod, Nickel Alloy Rings, Nickel Alloy Hollow, Nickel Alloy Triangle, Rectangle, Hex (A/F), Nickel Alloy Threaded, Half Round Bar, Profiles, Nickel Alloy Billet, Nickel Alloy Ingot, I/H Bar, Forging etc.
Processing	Bar cutting to 650mm
Our EN1A Round bar conforms to NACE MR0175/ISO 15156

Chemical Compositions of Carbon Steel EN-1A Bars

230M07 (EN1A) Specification Chemical composition
Carbon	0.15% max
Manganese	0.90-1.30%
Silicon	0.40% max
Sulphur	0.25-0.35%
Phosphorus	0.070 Max
Chromium	–
Molybdenum	–
Nickel	–
Lead	0.15-0.35% (Where specified)

Mechanical Properties of Carbon Steel EN-1A Bars

Max Stress	370-480 n/mm2 Min	dependent on ruling section
Yield Stress	240-400 n/mm2 Min	dependent on ruling section
0.2% Proof Stress	225-360 n/mm2 Min	dependent on ruling section
Elongation	6-10% Min	dependent on ruling section

You Need Our Support, to Have Any Projects?

Test Certificate

Why Starc Metals?

Packaging

Modern Equipments

Expert Engineers

Well Maintained

Efficient Factories

Carbon Steel EN-1A Bars Types

Stockist of Carbon Steel EN-1A Round Bars in Adelaide, Carbon Steel EN-1A Bars Supplier in Australia, Carbon Steel EN-1A Rods Price List in Canberra, Carbon Steel EN-1A Rectangular Bars Supplier in Adelaide, Carbon Steel EN-1A Hexagonal Bars Exporter in Melbourne, Carbon Steel EN-1A T-Bars Exporter in Australia, Carbon Steel EN-1A Cold Rolled Rods Exporter in Sydney, Carbon Steel EN-1A Round Bar Manufacturer in Brisbane, Carbon Steel EN-1A Round Bars Distributor in Australia, DIN 1.0715 Carbon Steel EN-1A Polished Rods Dealer in Melbourne

Equivalent Grades Carbon Steel EN-1A Bars

STANDARD	UNS	DIN
EN1A Round Bar	–	–

Frequently Asked Questions (FAQ)

What are the available thicknesses for Carbon Steel EN-1A Bars?

Carbon Steel EN-1A Bars are typically available in thicknesses ranging from 6 mm to 300 mm or more, depending on the manufacturer and specific requirements of the application.

What are the mechanical properties of Carbon Steel EN-1A Bar?

Carbon Steel EN-1A bar has high machinability, tensile strength of 400-550 MPa, yield strength of 280 MPa, hardness of 130-180 HB, and excellent ductility for general engineering applications.

What is Carbon Steel EN-1A Bar used for?

Carbon Steel EN-1A Bars are used for manufacturing precision components like gears, shafts, spindles, and fasteners due to their excellent machinability, surface finish, and suitability for high-speed machining applications.

Carbon Steel EN-1A Bars Uses

These Carbon Steel EN-1A Bars are widely utilized in industries that demand efficient machining and high-volume production of small to medium-sized components. They’re commonly found in the production of fasteners, nuts, bolts, studs, pins, and turned parts where precision is key. The automotive, hardware, and general engineering sectors often turn to EN-1A for its ease of cutting and reliable surface finish. These bars are also favored for components that require threading, drilling, and shaping with minimal tool wear. While they may not be suitable for heavy load-bearing applications, EN-1A Bars are perfect for precision parts used in assembly.

Our Products

Other Products

Other Material

If You Are Looking To Buy High Quality

We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.